It is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of upto 12mm thickness, that meet and exceed the requirements of National and International Standards.
For interior and exterior use for preparing thin bed block mortar for ALC ,
AAC and cellular concrete blocks.
Long working time
No curing required after block work is done
Improved adhesion between two blocks
Fast & economical
Cement mortar blocks/bricks
Concrete hollow blocks
Aerated light weight blocks
Cellular concrete blocks
Fly ash bricks
Coverage: Approximately 300 sq.ft. per 40 kg bag when used at 2mm bed thickness. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guideline for coverage of mortar is given when used with 25% water added to powder.
Packing: 40 kg bag
Note: Coverage is based on the block size of 600mm X 200mm X 100mm